All Armour items available for Rental.
Contact
Sir Blackwolf for more information!
Armor items without an Add to Cart button involve special shipping rates
due to weight. Please contact
Sir Blackwolf for shipping rates and to order.
International orders need contact
us for shipping rates to your Realm.
Armour
GAMBESON
It was always possible to drive the point of a weapon through the rings of a
mail shirt or shear it with a good cut. This often drove the damaged rings deep
into the wound. Even if the blow didn't cut the mail, the blunt trauma alone was
enough to break bone and damage internal organs. A thick, padded garment worn
under a mail shirt greatly reduced the risk of these types of injuries. Our
gambeson is of a type worn from the early middle ages well on through the
Renaissance. Choose M, L or XL. Hangs approx. 32" and weighs 1 1/2 lbs. Black
only.
MR-100278 $95.00
Size
HOODED GAMBESON
Gray Cotton Gambeson with
Polyfill Padding AND HOOD!. If you need something to make that armor you're
fighting in more comfortable, this may be the thing--a quilted gambeson! This
item is open on both sides with brass eyelets and cotton laces that make
adjustments easy. Size: LARGE/EXTRA LARGE.. CAN BE ALTERED TO FIT SMALLER SIZES.
Sleeve length: 21" Overall length: 48" Distance from crotch to bottom of leg:
16" Distance from the bottom of the collar to the top of the crotch: 28"
Distance when measured from armpit to armpit (laying flat): 25"
KLGambeson $120.00
ROBIN HOOD JACKET/GAMBESON A gambeson worthy of the outlaw that wore it. Heavy two-piece garment
consists of a corduroy undershirt with padded and studded sleeves and a
quilted sleeveless gambeson. Both pieces are chocolate brown corduroy.
Gambeson also looks good with the Robin shirt
MR100476 $95.00
Size
Tristan
Padded Shirt A lace-up cotton gambeson that can be worn as a stand alone garment or
as an undershirt with our Tristan leather jerkin. The sleeves are decorated
with a Nordic Celtic string design. Dry clean only.
MR100766 $60.00
Size
LEATHER BRIGANDINE
This suede leather armour has small steel plates riveted between an outer
shell and the inner lining. Weighing only 6 lbs it is very flexible and does
not hinder movement, features three buckles on each side for greater comfort
and better fit. Commonly worn over a gambeson and mail shirt, approx
32' long. Available in black or brown, S/M fits chest sizes to 38", L/XL
fits up to 48". MR-100402 $170.00
Color
Size
Female Leather Armour
Armour weight molded leather with buckles for adjustable fitting.
Black
Front
Back
PSL-BLKFA
$ 150.00
SCALED GAUNTLETS SCA gauntlets hand-crafted from 16-ga. Mild Steel. Gloves are not
included. Will fit medium to large hands. Overall Length is 12 inches. The
weight is 4 pounds per pair. Each finger scale is riveted with two steel
rivets to a leather strap. Brass rivets are used to line the perimeter of
the top of each hand and wrist area. Usually ships in 6-8 weeks
KL -
Scaled Gauntlets $195.00
CLAMSHELL GAUNTLETS High quality SCA Gauntlets
hand forged from 16-gauge mild steel. The inside lining of both hands is
tough genuine leather and ready for your hands. KL - Clamshell Gauntlets
$144.00
DEMI GAUNLETS 16th Century design SCA quality demi gauntlets articulated for Wrist
Flexibility. Form-fitting knuckles and thumbs with palm straps. Gloves are
attached to the interior of each gauntlet.
Leather gloves are NOT INCLUDED.
Gloves are sized medium/large.
Larger hands may require that the wrist area of the gloves be cut to allow a
better fit. KL - Demi Gauntlets $186.00
MITTEN GAUNTLETS Handsomely crafted 18 ga. mild steel gauntlets with pivoting thumbs
protect the hand and wrist when holding your weapon. Mitten fits med to
large size hands. KL - Mitten Gauntlets $263.00
Wearable Knights Gauntlets By the 14th century metal plated globes, or "gauntlets" replaced most
other forms of protection for a knight's vulnerable hand and wrist during
battle. Our hand crafted steel gauntlets look great on display but are also
wearable, so grab your sword, slip them on and charge! KE8300 $188.00
Wrist Length Gauntlets Here is a pair of over the wrist length plate "gauntlets" (Knights
plated hand protection) which have straps and leather loops to slip over
your own favorite pair of gloves. What a great way to customize to your own
style! Our hand crafted steel gauntlets are great for display or wear. KE8302 $198.00
FENCING GLOVES Our high quality leather gauntlets, with long cuff construction have
been in use throughout the ages. Suitable for most periods, they will make
an excellent addition to your outfit. Supple enough for fencing and tough
enough to use with "armoured gauntlets". Available in Black, size Large or
X-Large.
BTS -
Fencing gloves - $70.00
Size
MAIL
GAUNTLETS
To protect the back of the hand, we have added mail on our black leather
gauntlets and also placed slightly cupped steel lames all around the cuff.
These gauntlets offer good protection to the hand, wrist and lower arm
from a sword slash or draw cut. There's a pair much like these at the Art
Institute of Chicago that are highly decorative, however we have left ours
plain to keep the price down and to allow them to be historically correct
from the Early Middle Ages well into the Renaissance. XS, S, M, L or XL. MR-300008 $75.00
GORGET NECK ARMOR Hand forged from 16 ga. steel with rolled edges and heavy duty ball and
slot connections on the shoulders. Heavy leather attaches to our spaulders.
They will fit up to a 21" neck. KL - Gorget $105.00 To order contact
Sir Blackwolf
Riveted GORGET NECK ARMOR Hand-forged 16-ga. steel gorget with
riveted edges, heavy leather, and heavy duty ball and slot connection on
shoulders. Gorget attaches to our spaulders and will fit up to a 21" neck.
KL - Riveted Gorget $150.00
Steel Gorget This stylish knight's armour collar (gorget) wears
well with our chainmail clothing and affords valuable protection to
vulnerable areas of the neck and collarbone during swordplay and battles! Of
course its beauty also makes it just the right accent to all armour
collections. KE8129 $138.00
To order contact
Sir
Blackwolf
SPAULDERS These handsome Medieval spaulders are hand
forged from 16-gauge mild steel and ready for battle! Two genuine leather
straps buckle around the arm for support. One leather strap is also added to
the top of each spaulder to attach to additional body armor. They are lined
in leather. KL-Spaulders $150.00
ARMS Complete three piece arms containing the rerebrace, vambrace,and couter.
Upper and lower arm protection joined by the elbow coup. Open on the inside
to fit a large range of arm sizes. Does have some lateral adjustment.
Leather lacing is included to assemble the arms. 18 ga. mild steel.
KL -
Arms $240.00
ARM ARMOR High quality heavy weight SCA quality 16 gauge mild steel arms with
genuine leather buckles and solid steel rivets. These arms are designed to
withstand the most demanding combat situations! Measurements are : middle of
elbow to top of shoulder 13'. Middle of elbow to wrist 14'. Diameter at
shoulder 5.75'. Diameter at wrist 4'. KL - Arm Armor $270.00
ELBOW ARMOR SCA Elbows lined with leather hand-forged from 15-ga. Steel! Awesome
three-piece articulated design with leather straps and steel buckles. These
have also been fluted for extra strength. Elbows are 3 pounds each. KL -
Elbow Armor $75.00 Available in two tone or single color. Please specify length of chain
needed. Colors available: Black, Red, Green, Blue, Purple, Orange, Gold and
Silver.
One size fits most.
The codpiece covers the groin area and the chain is attached at the bottom, runs
betwixt the legs and clips to a ring (included) which is attached to your belt
at the middle of the back. Measure your chain from the lowest part of your
groin, through the legs and to your belt at the back. The chain should not be
tightly fitted. Codpiece can be adjusted with attached belt loops. MFC Codpiece One Color - $40.00 -
contact us to order
MFC Codpiece Two Color - $50.00
FLUTED STAINLESS STEEL LEGS 16-ga. SCA fluted stainless steel leg armor with leather lining in the
knees for extra comfort. Thigh to mid-shin protection. These legs are
hand-forged from stainless steel...so they won't rust!!! Leather straps with
steel buckles Dimensions: Overall length from top-to-bottom of 26-1/2
inches. Length from top of leg to midpoint of knee: 17 inches. Length from
midpoint of knee to bottom of armor: 9-1/2 inches. Weight: 15 pounds per
pair. SCA battle-ready! KL - SS Legs $300.00
LEG ARMOR Knight in armor legs, costume or combat! Made from 16-ga. mild steel
which bends at the knees. Legs are open in back and complete with leather
straps. They meet SCA armor requirements. We have added leather at the top
of each leg with a leather strap and buckle so that you can attach them to
your belt or armor. The legs are 7 inches wide at the top, 6 inches at the
knee, 5 inches at the ankle...I would consider these to be size large.
Overall length is 35 inches, 30-1/2 inches to top of ankle. NOTE 1: The
straps are black in the picture, but may come in brown. KL - Leg Armor
$188.00
SHORT LEG ARMOR SCA 16-ga. fluted steel leg armor with leather lined knees for extra
comfort.Thigh to mid-shin protection with leather straps and steel
buckles.Dimensions: Overall length from top-to-bottom of 26-1/2 inches
Length from top of leg to midpoint of knee: 17 inches Length from midpoint
of knee to bottom of armor: 9-1/2 inches
Weight: 15 pounds per pair SCA battle-ready! KL- Short Legs $240.00 To order contact
Sir Blackwolf
STAINLESS STEEL KNEES SCA stainless steel, leather backed knee armor hand-forged from highly
polished 16-ga. stainless steel ...SO THEY WILL NOT RUST! Fluted Style,
Leather Straps with Steel Buckle. Five-Piece Articulated Design Offering is
for one pair (two pieces) of knees.
KL - SS Knees $150.00
SCA ARCHER KNEES These sturdy knees will make a solid addition to your growing collection
of strong SCA armor. They are made of 16-gauge mild steel and genuine
leather. Measurements are : from top to bottom 15 in. Side to side 7.5 in.
The knees are lined with genuine leather and have three leather straps with
steel buckles for your legs. KL - Archer Knees $120.00 Designed to protect the lower leg from the cut of a sword or the vicious
kicking that occurred during battle. Although worn by many Roman units, greaves
were not worn by all. Our replica steel greaves are based on patterns pictured
on Trojan’s Columns and feature an articulated knee piece for extra protection.
Made by Windlass Steelcrafts®. L-18 3/4". W-8 3/4". Bend-5 1/2". (No straps
included) MR300010 $77.00
FIVE
PIECE GREAVES
Dimensions: From top to the upper ankle opening-14" Overall Length-17" Width
at top-6" Width at bottom-5" Weight pair- 6 lbs. Steel- 16ga. mild steel KL Greaves $112.50
BLACK
GREAVES WITH BRASS ACCENTS
Two handsome and thick black leather greaves hand crafted from five separate
pieces of leather riveted together with 84 solid brass rivets. Leather laces are
included. Greaves are shipped flat. KL Bl/Brass Greaves $87.50
Brown
Greaves with Brass Accents
Two handsome and thick brown leather greaves hand crafted from five separate
pieces of leather riveted together with 84 solid brass rivets. Leather laces are
included. Greaves are shipped flat. Overall length is 12 inches. KL Br/Brass Greaves $75.00
XL
FRONT AND BACK PLATE Extra large size medieval breast plate and back. Hand forged from 16
gauge steel with brass accents and genuine leather. Measurements: 20 inches
when measured from the neck opening to the bottom., will fit 50" to 56 "
chest Usually ships in 6-8 weeks KL - XL Plate $338.00
MEDIEVAL FRONT AND BACK PLATE This armor is handsome and rugged. Made from 16 ga. steel, it has
rounded edges, genuine leather straps, steel buckles, and solid brass
accents. Measurements: 20 inches when measured from the neck opening to the
bottom. Will fit 36" to 42 " chest.
KL - Black Plate $255.00 To order contact
Sir Blackwolf
CHURBERG
BREAST PLATE AND SPAULDER COMBO Churberg Style Breast Plate 16ga. Spaulders! Hand-Forged from 18-ga.
Steel.Genuine Leather Straps. Will fit up to a 49" Chest. Weight: 17-1/2 lbs
KLCB Cuirass/Spaulder $285.00
To order contact
Sir
Blackwolf
FANTASY
ARMOR All armor pictured is genuine leather with brass accents. The cross design
on the breast plate is rendered in solid brass. The leather on both breast plate
AND bracers is laminated on both sides to a 1/4" formed backing, giving the
armor the desired sturdiness for maximum protection. Cross is only on the Front!
The breast plate armor is made in two pieces and is laced together above the
shoulders and on the sides with leather laces. Will fit up to a 42" chest when
laced completely closed. 18-1/2" from the bottom of the neck opening to the
bottom of the breast plate. But dont forget, the pictured bracers are also
included! KL Fantasy Armor $370.00 Heavy saddle grade leather is used to produce this scaled breast and back
plate with matching shoulders. Sturdy straps along the sides and shoulders
insure a good fit, along with adjustability. Nickel rivets and brass buckles.
Order S/M or L/XL. MR300416 $365.00
Wearable Gothic Armour
There are no finer examples of armour design than that of Gothic
styling. The curves and fluting that make this armour truly unique were
originally created by the artistic German armourers of the late 15th
century. We have recreated their passion for beauty in armour with this
magnificent Gothic breastplate that will excite the soul. Our full size
wearable armour looks great on display; however, if you want a real feeling
of gallantry, don your armour and set dansels hearts a flutter. Each stylish
gothic armour cuirass (breastplate & backplate) comes complete with tassels
(upper thigh protection) and fits chest up to 44" and waist to 38". Hand
crafted of 18 gauge steel. (Pictured with our chainmail sold separately).
KE8160 $498.00To
order contact
Sir
Blackwolf
CHURBERG SABATONS Churberg style fully articulated armor legs ready to wear to your next
event. Hand-forged from 18-ga. steel with solid brass accents and genuine
leather straps. NOTE: The wood stand is not included in this offering. The
Sabatons are attached to the legs with Chicago screws and can be removed and
worn separately. Overall leg length is 32". The distance from the floor to
the middle of the knee is 22". The distance around the calf is 20". The
pair's weight is 17 lbs and will fit up to size 11 shoe or boot. KL - Sabatons $450.00 To order contact
Sir Blackwolf This is a full size, wearable half-armour display. Museums and Armories
throughout the world display their treasured armour on stands creating an
interesting focal point for their exhibits and now you can too! What an
impression you will make when your friends and colleagues visit your home or
office as you display your own fully handcrafted armour, styled and created as
the originals! Sets display on their own stand rivaling museum originals! The
display includes our stylish Cuirass (Armour breastplate & backplate). Included
in display is a helmet and wooden display stand. KE8194 $528.00To
order contact
Sir Blackwolf
Renaissance Armour Display
Museum and Armories through the world display their treasured armour on
stands creating an interesting focal point for their exhibits and now you can
too! What an impression you will make when friends and colleagues visit your
home or office as you display your own beautifully hand crafted armour styled
and created as the originals! This beautiful set displayed on its wooden stand
rivals museum originals! The armor comes complete with cuirass (breastplate &
backplate), helmet and stand. KE8201 $538.00To order contact
Sir Blackwolf
All the suits of armor shown below are steel,
wearable and handmade in Italy. Each suit of armor comes complete with stand as
shown. All suits of armor on this page are hand-made by artisans and
craftsmen. Pieces are fully articulated and have the finest detail.
Our period full armor suits come complete with
beautiful wooden stands. Everything ships complete as shown in the
pictures
Medieval Blued
Full Suit of Armor Steel wearable armor
handmade in Italy. KE6210 $3,998.00 To order contact
Sir
Blackwolf
Medieval Full
Suit of Armor Steel wearable armor
handmade in Italy. KE6211 $3,998.00
17th Century
Knights Armor
Steel wearable armor
handmade in Italy. KE6212 $3,998.00
Hand forged from
18ga. Mild steel.Includes Helmet, arms,gauntlets,Front and Back Breast Plate and
Legs with sabatons. Arms have leather straps that attach them to the breast
plate. STAND WITH WOODEN BASE INCLUDED!! Sword not included. Over all height on
stand is 6'-4". This is wearable armor, but is being sold as a display. There is
no guarantee that the armor will fit you.
KL - Full Plate $1345.00
(A) GERMAN GOTHIC CUIRASS & TASSET
This consists of the breast and back plates with their
fauld and tassets (upper thigh protection). Handcrafted of 18 gauge steel.
Approx. weight-17 lbs. Fits up to 46" chest. Waist 38". MR-300100 $465.00
To
order contact
Sir
Blackwolf
(B) Salade with Bevor
Suitable for foot or mounted combat. Helm sits flush with bevor which protects
the chin and throat. Features a movable visor, both items made of 18 gauge
steel and are lined and wearable. Circa 1480. MR-300148 $235.00
(C) Pauldrons
Protection for both shoulders, beautifully fluted. MR-300224 $150.00
(D) Mitten Gauntlets
Beautifully crafted gauntlets protect the hands and wrists when closed about a
weapon. One size fits most. MR-300226 $175.00
(E)Vambrace
Upper and lower arm protection including elbow coup. One size fits most. MR-300222 $150.00
BUTTED ZINC 1/2 SLEEVE If the long sleeve is just a tad bit long for you, try the sporty half
sleeve. Hand-forged from 16-ga. mild steele, this shirt is a great addition to
your chainmail collection. Give yourself the freedom to swing your sword
comfortably with this half sleeve chain mail shirt. Will fit up to 49" chest.
The length will be determined by the upper body size of the wearer. KL - Half sleeve Hauberk $225.00
BUTTED ZINC HAUBERK This item is made from sixteen gauge zinc plated steel with 8mm rings
which are smaller than 10mm" rings and provide a tighter closer weave. This is
high quality 8mm " mail..and should not be confused with cheaper 18-ga. mail
which is flooding the internet. COIF NOT INCLUDED. Will fit up to 49" chest.
Overall length is determined by the upper body size of the wearer. KL -
Longsleeve Hauberk $300.00
CHURBERG CHAINMAIL HAUBERK This item is made from sixteen gauge zinc plated steel AND solid brass 8mm
rings (which are smaller than 10mm" rings and provide a tighter closer weave).
This is high quality 8mm " mail..and should not be confused with cheaper
18-ga. mail which is flooding the internet. Will fit up to 49" chest. The
overall length will be determined by the upper body size of the wearer. KL
- Churberg Hauberk $225.00 To order contact
Sir
Blackwolf
CHAIN
MAIL SHIRT 16 gaugelinks are combined in the 'international" pattern.,
4 links through the 5th. Fits up to 54" chest, 33" long shirt, sleeves
are approx 18" long. Weight 23lbs. Shouldbe kept oiled at
all times. MR-300170 $256.00 Coifs may be worn with or with helms. made of 16 gauge steel butted
rings. Weight 5lbs 8oz. Should be kept oiled at all times. MR-300188 $95.00
BLACK COIF
High quality sixteen gauge, 5/16" inside diameter steel rings.
KL - Black Coif $75.00
BLACK BISHOPS MANTLE Black bishop's mantle hand made from 16 ga. Blackened 5/16" steel rings.
KL - Black Mantle $75.00
ZINC BISHOPS
MANTLE Handmade HIGH QUALITY bishop's mantle. Chain
mail specs: sixteen gauge 5/16" inside diameter steel rings; zinc-plated,
machine-cut steel (Helmet not included).
KL - Zinc Mantle $ 75.00
Leather
& Steel Vambrace
These pieces of armor for the lower arm are made from a double thickness of
heavy leather and have antiqued steel riveted on in a decorative pattern.
Excellent protection from a draw cut and they finish off an outfit handsomely.
Made by Windlass Steelcrafts®. MR200606 $90.00 pair
STEEL
VAMBRACE PAIR
This steel lower arm guard will go with a large range of period
outfits and weapons. It is nicely formed and lined with leather. Straps on
the inner arm adjust to fit just about anyone. When the head and hands were
protected by armor, the lower arm was one of the prime targets in swordplay.
In many cases it was the only piece of armor worn, most often along with a
mail shirt. 9 1/4" x 6 1/4". Wt.-1 lb. 10 oz.
MR-300348 $60.00/pr
Handcrafted Leather
Vambraces
Custom
Heraldic Crest Bracers Armour weight leather with grommets for lacing Item# PSHCB $200.00 pair
Leather Bracer with Trim Armour weight leather with grommets for lacing
Item# PSBT $150.00 pair
Leather Bracer with Cross Armour weight leather with grommets for lacing
Item# PSBC $160.00 pair
Leather Bracer with Silver Tacks
Armour weight leather with grommets for lacing
Item# PSBST $120.00 pair
Decorated Leather Bracer Armour weight leather with grommets for lacing
Item# PSBLB $80.00 pair
Basic Leather Bracer
Armour weight leather with grommets for lacing
Available in Black or Brown.
Item# PSBLB $30.00 each
Color
Buckle Leather Bracer Armour weight leather with buckles
Available in Black or Brown.
Item# PSBB $30.00 each
Color
Leather Bracer with Initial Armour weight leather with grommets for lacing
Please indicate desired Letter for Initial Item# PSBI $50.00 each
Initial
Marbled
Leather Bracer with Studs
Armour weight leather with grommets for lacing Item# PSMBS $90.00 pair
Brown
Leather Bracer with Studs
Armour weight leather with grommets for lacing Item# PSBST $90.00 pair
BRACERS
with Brass Accents Two handsome and thick brown leather bracers hand crafted from three
separate pieces of leather riveted together with 50 solid brass rivets.
Overall length is 9". Width at top is 10". Width at bottom is 8". Leather
laces are included. Bracers are shipped flat. KL Br Bracers $65.00
Studded
BRACERS
Two handsome and thick brown leather bracers hand crafted from three
separate pieces of leather riveted together with 50 solid brass rivets.
Overall length is 9". Width at top is 10". Width at bottom is 8". Leather
laces are included. Bracers are shipped flat. KL BR Studded Bracers $50.00
Helms
HELMET LINER
This Padding Kit includes 8 feet of 2-inch wide custom-fabricated padding
material. The design used to pad the helmet in the picture is only one way the
foam can be applied to your helmet. Our padding is made with 1/2-inch dense
black closed-cell foam securely affixed to an additional layer of
1/4-inch soft-as-down protective foam lining that is covered with velour fabric.
Your head will be cradled in comfort when you use our padding to create a custom
fit for any helmet. Cut the padding strips to the desired lengths and attach to
the inside of your helmet or armor with contact cement or Velcro.
(NOTE: Cement and Velcro are not
included in this kit.)
KL- Liner $32.00
ARMING CAP
Worn under a helmet or coif, the arming cap offered extra
cushioning for the head. Although the original cloth caps were
widely stuffed with rags and straw, our poly/cotton cap is
thickly lined with fiber fill. Machine washable. Quilted
construction with a tie cord. S (for 21" head circumference), M
(22"), L (23") and XL (24").
MR200174 $30.00
Size
ARMING CAP One size fits most, heavy quilted padding
KL-Armingcap $30.00
Suede Arming Cap Made of durable suede, one size fits most MC-Arming Cap - $60.00
Tudor Close Helm This is the classic form most often associated with the image of
a knight. During Henry the VIIIs wars in France (1522-1523), this
form of helmet would have been in use on both sides. This excellent
reproduction by the fine craftsmen of Windlass Steelcrafts® is fully
wearable. The term Close Helm refers to the fact that this type
locks firmly around the head for complete protection, with a very
narrow field of vision to expose the eyes as little as possible. The
visor is pierced with key-holes on both sides for good air flow
during combat. The lower bevor section is split into two overlapping
pieces that are hinged at the sides and hook together at the chin
while the visor locks down firmly over it. Made from 16 gauge hammer
hardened steel. MR300432 $225.00
LATE
NORMAN HELM This classic hospitaller nasal helm features a unique hinged
nose guard, as specified by Ridley Scott. Aged 18 gauge steel,
adjustable liner and chin strap. Stand included. Made by Windlass
Steelcrafts®.
MR-300370 $190.00
TRANSITIONAL
HELMET
This type of helm is an excellent example of the
evolution of the knightly helmet. It is one of the first attempts to protect the
face with more than just a nasal extention or a mail coif with a face flap. This
helm continued on to become the complete head protection of the barral helm. 18
gauge steel Stand included. Made by
Windlass Steelcrafts®.
MR300394 $175.00
BASCINET W/CHAIN MAIL Present on almost all of the grave effigies. Worn under the
Great Helm, it is made for superior head protection and could be
worn alone for foot combat. Adjustable liner. MR-300406 $245.00
Developed early in the 12th Century, the Great Helm became the
manstay of the medieval fighting man, and lasted for about 300
years. Worn over a mail coif and padding this helm has menacing,
narrow eyeslits for maximum protection. Made by Windlass Steelcrafts
from 18 gauge steel.
MR-300418 $185.00
PEMBRIDGE HELMET Helmet dimensions are: 14" overall height, 8" from the bottom to
the break above the eye openings, 9-3/4" inside when measured on a
straight line from forehead to back and 9 " from ear to ear. Wt. 6
1/2 pounds. This helmet is made from 16 ga. mild steel. KL - Pembridge Helm $180.00
SCA HELMET This is a full size wearable adult helmet. Its dimensions are:
12" Tall, 8 1/2" wide, 9" front to back and has a 27 1/2"
circumfrence. Forged from 15-ga. mild steel with solid brass
accents. Padding is not included. KL - SCA Helm $180.00
Crusader Great Helm A prime early flat top battle helm prevalent in use during the
early crusades. Full size & wearable. Skillfully handcrafted in 18
gauge steel. Magnificent! KE8137 $160.00
European Pigface Bascinet This helm is circa 1390. This helm style became popular in the late 13th
century widely replacing the Great Helm because of its close fit styling.
Towards the late 14th century the long snouted appearance had earned it the
English nickname Hounskull, or "Pig-faced bascinet". This exceptional full
size helm is skillfully hand-crafted of 18 gauge steel and adorned with
brass accents. Each helm is wearable and will make an impressive addition to
your collection. KE8106 $198.00
Norman Helm This skillfully handcrafted Norman helm is a wonderful example of the
style worn by the fearless Norman knights of the 11th century. This fully
wearable life size helm is made of 18 gauge steel and will ignite the
passion and spirit of these cunning Norman knights of the medieval age in
you! KE8122 $162.00
Chainmail Bascinet Helm 13th Century "camail" warriors helm! The term "camail" is an ancient
term meaning "curtain-mail" describing the protective curtain of chainmail
hung from the helm that draped the neck to the shoulders in battle.
Historically a plate gorget was also worn with this helm along with
chainmail body armour for extra protection. Examples may be seen today in
church brass castings. This fully wearable historical helm is made of 18
gauge steel and is a rare find! KE8127 $178.00
European Comb Morion Helm Circa 1570. Although commonly thought of as a Spanish Morion helmet,this
helm became the universally popular style for the pikemen during the reigns
of Edward VI of England. Full size and handcrafted with brass accents. Fully
wearable! KE8102 $120.00
Tournament Knights Spiked Knights Helm This is no average Knights Helmet, it goes beyond the period styles most
commonly duplicated today. Their spiked stud ornamentation rivals the
efforts and design of those great artists who created tournament armour for
nobles and knights through the middle ages. The purpose of decorated armour
was to intimidate and frighten an opponent. Many frightening and unique
styles of decorated armour and helms can be seen in museums today. We are
proud to offer this fantastic examples of tournament knights helmets and are
sure that you'll agree that spikes do give them a quite menacing touch
that's just perfect for conquering your foe!
KE8214 Price: $248.00
European Bascinet The favored "War Helmet" of the 1300 and early 1400's! During this time
of transition from chain mail to plate armor, the bascinet style helm has
held its place in history. Inventory of the "Duke of Gloucester's" effects
drawn up in 1397 lists two bascinets for "war and jousts" and three helms
(like the frogmouth) for jousts of "peace", implying an actual favor of this
rounded style bascinet for glancing off blows during combat. Detailed with
brass accents. Full size and wearable. KE8110 Price: $186.00
Knights Helm This classic full size knights bascinet helmet from the 17th century
with round top design deflected blows minimizing a direct strike in battle.
This fine visored Knights helmet is skillfully handcrafted of 18 gauge
steel. Full size for wear. KE8140 Price: $230.00
European Barbute This helm, circa 1460 is a prime example of the true genius of early
Italian helm smiths! The Barbute style helm provided visibility so crucially
needed in battle while providing protection of the neck. This is a full size
wearable reproduction skillfully handcrafted of 18 gauge steel. Magnificent! KE8101 $160.00
Italian Cabasset Helmet This helmet is Circa 1600. This skillfully hand crafted Cabasset Helm
was a popular style worn by the foot soldiers of Italy and Spain. It is a
fully wearable life size replica that has been beautifully constructed of 18
gauge steel with brass fittings that accent this simple yet practical
historical helm! KE8104 $98.00
German Sallet Helm This helm has the popular gothic styling so favored
by the German armourers of the late 1400's. Wonderful examples still exist
today in museum and castle collections including the Tower of London in
England.
As many of the original owners of such cherished armour were of noble birth,
they could afford the best in style and craftsmanship. You too can now
possess a full size wearable museum quality German Sallet Helm skillfully
handcrafted of 18 gauge steel for your own heirloom collection. KE8103 $158.00
Barbarian Helmet
this fearsome helmet has a built-in leather mask and stiff leather lames
around the back. The shell is hammered 16 gauge steel with an antiqued
finish. Adjustable liner. Made by Windlass Steelcrafts®. MR300366 $245.00
WOODEN HELMET STAND A stately, elegant way to display your favorite
helmet on your mantle, bookshelf or cabinetry. Handsomely accommodates any size
helmet from Morians to Great Helms. Helmet not included. Beautifully turned
hardwood post has sturdy round, beveled base. Stained. 18 1/4" tall. Comes
unassembled.
MR- 800040 $30.00
Shields
Templar Shield This high quality shield is made of curved wood and is heavily padded
with a durable canvas. The black and white shield has adjustable arm straps
and padded arm guard on the back. The canvas is also good for painting your
own design. No air shipping available on this item, $5.00 additional
shipping/handling included. Overall: 22-1/2" x 25" MR801570 $150.00
Viking
Shield (brown) This finished shield has been stained a dark brown and has a steel boss,
decorative strips and rim, all bolted on. The back is covered in felt and has a
grip and arm strap 1/2" thick by 29" round. Made by Windlass Steelcrafts®.
MR801108 $180.00
Knights Shield
The shield is one of the oldest forms of defense but history has proven it
to be also a thing of beauty! Our 26"H x 23"W steel Knights "heater" shield
has a cross design and looks great on display. It has a handle at back for
use. KE8130 $178.00
Classic Battle Shield
The round form is one the most "classic" shield styles used in history
dating back to ancient times. The Vikings, Greeks, as well as Roman infantry
soldiers from 236 to 565AD carried round shields. This practical shape
continued to influence shield designs of later time periods well up through
the age of renaissance. This shield looks great on display, and has hand
straps for use. 16-1/2" diameter. KE8184 $140.00
Domed Steel Shield The small round shield remained popular
from the 13th to the 17th century. Many soldiers preferred this to the full-size
shield to be able to move more quickly. Dia.-23 1/8". Wt.-6 lbs. Made by
Windlass
Steelcrafts® of 18 gauge steel with leather grips. MR800176 $90.00
HEATER SHIELD
Solid Plywood construction with diagonally mounted arm straps. Painted in the
solid base color of your choice. Specify left or right hand. Dimensions: 23" by
29"
MFC-Heater $100.00
CENTURION SET Roman soldiers costume appropriate for Passion plays. Full-size
adult wearable Roman helmet. Measures 9" straight front-to-back, 7"
ear-to-ear. Helmet is 18-gauge mild steel with brass accents. The mild
steel breast plate is also 18-gauge, and does not have a back plate (for
weight/comfort purposes); meant to work with cape. The armor affixes to
body with leather straps and buckles and will fit 38"-48" chest; 34"
from top of front plate to bottom of the leather cingulum belt. Under
the body armor is a heavy-duty wool-blend red felt tunic with brass
rivet accents along bottoms and sleeves. The Fringed bottom extends
below the muscle armor. The wool provides padding for front-plate.
One-size-fits-all (Can be worn without the breast plate). The cape is
red satin with gold trim. NOTE: Helmet padding is not included. KL - Centurion Set - $690.00
CENTURION SET Extra Large
Fits from 48 to 52" chest!! 24" from neck to bottom of breast plate and
38" form neck opening to bottom of cingulum belt.**Please note, this
Roman costume comes with a BACK PLATE.
KL- XL Centurion Set - $665.00
LEGIONARY SET
Roman soldiers costume appropriate for Passion plays. Full-size adult
wearable Roman helmet. Measures 9" straight front-to-back, 7"
ear-to-ear. Helmet is 18-gauge mild steel with brass accents. The brass
brows on the top of the helmet may come to you in steel. The mild steel
breast plate is also 18-gauge, and does not have a back plate (for
weight/comfort purposes); meant to work with cape. The armor affixes to
body with leather straps and buckles and will fit 38"-48" chest; 20"
from top of front plate to bottom. Under the body armor is a heavy-duty
wool-blend red felt tunic with brass rivet accents along bottoms and
sleeves. The Fringed bottom extends below the muscle armor. The wool
provides padding for front-plate. One-size-fits-all (Can be worn without
the breast plate). The cape is red satin with gold trim. NOTE: Helmet
padding is not included.
KL - Legionary Set - $385.00
EMPEROR SET
Striking breast plate Roman body armor hand forged from 18 ga. SOLID
BRASS with rounded edges, genuine leather straps, and steel buckles.
Measurements: 20 inches when measured from the neck opening to the
bottom. Will fit 42" to 48 " chest. The breast plate does not have a
metal back. It is held in place on the body with four leather straps
with buckles. Two over the shoulders, two around the waist and two under
the arm pits. The brown wool tunic underneath the breast plate provides
excellent padding and a genuine look. The tunic is adjustable, and one
size fits all. The helmet is a full size adult wearable piece made of
solid brass. The cape is red satin with gold trim. The bracers are
genuine leather with solid brass rivets and accents. Helmet comes with
red hair piece.
KL - Emperor Set - $657.00
TRIBUNE SET
Lorica Segmentata design will fit up to 40" chest. Made from 18 ga.
steel. Leather cingulum belt will fit up to 36" waist. Items included:
Lorica Segmentata, Helmet, Cingulum Belt
KL - Tribune Set - $538.00
Roman Maile
Mail, called Hamata by the Romans, was in use before the reign of Caesar
until well after Trajan. The handsome shirt is trimmed in leather at the
arms and throat and has removable studs for attachments. The butted
rings are blackened. One size fits most.
MR - Roman Maile - $265.00
Roman Oval Shield
This wooden oval cavalry shield is covered front and back with leather.
It has a black steel boss with gold leather wings and lightning on the
face and on the arm straps on the back. Great to complete your Roman
outfit!
MR - Roman Oval Shield - $175.00
Roman Tunic
Our brightly colored Roman tunic copies the standard issue to the Roman
legions from the days of the Republic to the end of the Empire (around
400 AD). Worn under armor or by itself, the simple lines of this tunic
are classic and lend themselves to many combinations of clothing from
later periods of history. This oversized shirt extends to mid-thigh,
giving it a distinctive look. Red only. Romans took the color from the
Spartan's red cloaks as later did the English army. Spartans wore red so
that their enemies would never see them bleed. Shown here with the Roman
Belt with Hanging Leather Strips. Sizes S (36"-38"), M (40"-42"), L
(44"-46"), XL (48"-50"). MR - Roman Tunic - $50.00
Roman Sandals
Sandals like these were worn by the Roman Legion for the long march and
the campaign that often followed it. The hobnails kept the sole from
wearing out too quickly. Leather construction. Brown and limited
quantity in black. Whole sizes 6-12. Excellent quality. MR - Roman Sandals - $65.00
Orders will be processed as soon as payment is received. Allow 4
to 6 weeks for delivery. Not responsible for holidays,
inclement weather, or company strikes. No returns, refunds,
or exchanges except in the case of damaged merchandise.
Please direct all questions to:
Lady Dagrny
FENCING GLOVES
Viking
Shield (brown)
